internal/netscan/ discovers hosts on the network Maven is configured to look at:
a TCP-connect scan (net.DialTimeout, no raw sockets, no privileges) plus a read
of the kernel's ARP cache. Wired as a read-only query source, "network", so
"какие устройства в сети?" is answered by a scan instead of by whatever old note
happens to be nearest.
Scanning is a read, but an unbounded scanner on a home LAN is noisy and easy to
point somewhere it should not go, so the package is built around four bounds:
- Scan takes NO target argument. The range comes from the config block and
from nowhere else, so there is no exported way to scan an arbitrary prefix
and nothing an utterance, the router, or a scanned host says can retarget
it. That is asserted directly: the test watches every address handed to the
dialer and fails if one falls outside the configured prefix. The ARP cache —
the one input the network itself populates — is filtered to the configured
range for the same reason.
- Every configured CIDR must be private (RFC1918 / CGNAT / link-local) and no
larger than 1024 addresses. 8.8.8.0/24, 0.0.0.0/0 and 10.0.0.0/8 are refused
at config load, not after the packets have left.
- Rate-limited to a configured connections-per-second across the whole scan,
so it looks like background traffic rather than a portscan.
- Bounded in total by MaxHosts, a per-connection timeout, a 20s turn budget
and the context; a canceled scan stops dialing immediately.
Off unless configured: dark without "enabled": true, and applyDefaults
normalises a disabled block to nil. deploy/mavend.json carries it disabled.
BLUETOOTH IS NOT SHIPPED, AND IS BLOCKED, NOT SKIPPED. The plan's other half
(internal/bluetooth/, RSSI presence probes) needs a bluez stack that is not
here: bluetoothctl and hcitool are not installed, bluetoothd is not installed,
the bluetooth unit is inactive, and org.bluez is not on the system bus. hci0
exists as a kernel device and nothing can talk to it. The docker deploy is
further away still — it would need host networking, the D-Bus system socket
passed in, and CAP_NET_ADMIN. Writing an exec wrapper around a binary that does
not exist, against an output format nothing here can produce, would be a guess
dressed as a feature. It needs a decision about privileging the container before
any of it is worth writing.
Vikunja #257
A `smarthome` block points Maven at a Home Assistant instance. She reads its
entity states to answer "что включено дома?", and every controllable device
becomes a PROPOSED row in the existing act allowlist — cmd
["smarthome",<entity_id>,<service>], scope smarthome:<domain> — so nothing new
had to be invented for the mutating half. ProposeTool/EnableTool/DisableTool,
tool.Matcher and the confirm turn are untouched; one branch in Executor.Exec
routes such a row to the client instead of exec, and "smarthome" is never run as
a binary. This is the same trick overnight/mcp-tools used for #251, on purpose.
Discovery only ever PROPOSES, and every control row is destructive=true: there
is no read-only way to turn the heating off, so flipping something in his flat
always costs a confirm turn and always had to be enabled by hand on /tools,
behind step-up.
The entity and the service come from the row he enabled, never from the
utterance — Exec drops the spoken tail for a house row. A router that misheard
can pick the wrong lamp; it cannot compose a target of its own. The service is
checked against the domain's table on the way out too, so a hand-edited cmd
column cannot reach an arbitrary Home Assistant service. set_brightness and
set_temperature are deliberately absent: a spoken number the router got wrong is
a wrong act on real hardware, and on/off is the whole of what a voice turn can
defend.
The read side is a query source ("home", before calendar and the recall passes)
so "что нового дома?" is not answered from an old note. Its matcher needs a
house marker plus an ask plus a device word and bails out on weather wording,
because "какая температура на улице?" belongs to the weather source.
Off unless configured: the block is dark without "enabled": true, and
applyDefaults normalises a disabled block to nil so "off" stays in one place.
deploy/mavend.json carries it disabled, with the token as ${HA_TOKEN}.
NOT shipped, and not faked: MQTT / Zigbee2MQTT (plan steps 2 and 5) and the
sensor-to-fact and presence-probe pipelines. There is no broker and no Home
Assistant anywhere on this network — 8123 and 1883 are closed on every host in
192.168.1.0/24 — the module tree is vendored so a paho dependency cannot be
added offline, and Home Assistant already fronts Zigbee2MQTT where it exists.
Writing a sensor pipeline with no sensor to test it against would be a guess.
Vikunja #256
Maven can record a meeting when she is told to, transcribe it through the
STT she already has, and write a summary note. The audio lives in the blob
store #252 introduced, under the same retention loop.
Nothing here listens. Recorder.Append is the only way audio enters and it
refuses every frame unless someone explicitly started a session, so audio
arriving at an idle core is dropped rather than buffered. The plan document
asked for a keyword trigger ("maven record" heard in the room) and that is
refused: noticing a keyword means listening to the room, which is the one
behaviour this capability must not have.
Off unless configured twice over. No media block means nowhere to keep
audio, no capture block means no recorder, and in either case the four IPC
methods answer ErrUnknownMethod. On an unconfigured box there is no wire
path that begins a recording at all.
A forgotten session ends itself at max_minutes, checked on every append,
and the audio collected before the cap is kept. Stop with discard set is
what "забудь, не записывай" maps to and it leaves nothing behind. The
verbatim transcript is not saved unless save_transcript says so; the
summary is.
Long audio against n_ctx 4096 is handled by map-reduce over 3000-rune
windows rather than by truncation, because a truncated meeting summary
reads as complete and is not. Transcription is windowed at five minutes so
the whisper worker stays responsive to the voice path.
No second STT: internal/capture takes the stt.Transcriber the voice path
already holds. Capture with voice off is refused rather than degraded,
since hours of unreadable audio of other people is worse than no recording.
The three write methods are AuthWrite, not AuthStepUp: step-up needs a
passkey gesture the voice path cannot make, which would leave "запиши
встречу" impossible by voice. capture_status is AuthRead.
make build and make test both pass.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TrVSBKe3RFDF4fGYKWYQnX
Second half of the MCP client: the tools the manager discovers become rows in
the existing act allowlist instead of a parallel capability system.
An MCP tool is encoded in the columns that already exist — cmd
["mcp",<server>,<tool>], scope mcp:<server> — so no migration, and
ProposeTool/EnableTool/DisableTool, tool.Matcher and the confirm turn need no
changes. One branch in Executor.Exec routes such a row to the manager instead
of exec, and "mcp" is never run as a binary.
Discovery only ever PROPOSES. destructive comes from the inverse of the MCP
readOnlyHint, so a tool that does not promise to be read-only inherits the
confirm turn, and enabling stays on /tools behind step-up.
Voice args are positional and MCP args are named, so CallPositional binds only
what it can defend: no required properties runs bare, and a read-only tool with
exactly one required string or number gets the tail. Everything else refuses
with ErrNeedsArgs rather than guessing. The read-only condition was learned
against the live Vikunja server: update_task requires only task_id and takes
the rest as optional, so one guessed argument blanked the fields it did not
mention. A partially-filled write destroys what it omits, so a mutating tool
never receives a guessed argument.
Also: a read-only mcp_servers IPC method and an "MCP servers" card on /tools
showing transport, target and state, with the trust level of a local target
spelled out. There is deliberately no call-a-tool IPC method and no run button,
so mutation keeps exactly one path.
Vikunja #251
Loading a different gguf was a one-line edit to phraser.model_path plus a
restart. It is now an owner-triggered IPC call, off unless configured.
internal/phraser/swap.go holds the safety properties as code:
- Never two models resident. The old llama-server is killed and reaped
before the new one is launched. One 1.7B fits the Vega iGPU; a
blue/green overlap would OOM the box, so it is not offered.
- Atomic from a turn's point of view. Swap drains the in-flight turns
(they finish on the old model), then refuses arrivals with ErrSwapping
until the new server has answered /v1/models. No turn ever sees half a
swap; refused turns fall back to the classifier cascade.
- A failed load rolls back. If the new model does not start or does not
probe, the previous one is reloaded and the call returns RolledBack
with the error. If the rollback also fails the daemon says so and
degrades to the classifier rather than pretending to serve.
Holders of the completion client are re-pointed, not rebuilt: llm.Client
guards its base URL and LLMPhraser.OnSwap re-points it, so the router, the
replier, the mail extractor and the memory evaluator follow the new port
without knowing a swap happened.
Reach is deliberately narrow. phraser.swap_models is an exact-match
allowlist of absolute paths a human wrote, rejected at startup otherwise,
so "swap the model" can never mean "load any file on my disk"; the running
model is always swappable back to. MethodSwapModel is AuthStepUp, the same
rung as mutating the tool allowlist, and /models gates POST through the
same stepUpOK the tools page uses. Nothing calls Swap on a timer and no
act, intent or utterance reaches it.
Vikunja #250
The network fallback behind the local sources, off unless configured.
internal/crawl is pure: a stdlib robots.txt parser (group specificity,
wildcards, Crawl-delay, cached per host), HTML-to-plaintext extraction, and a
watcher that notes a watched page only when its text changed. It has no store
access and no net/http; cmd/mavend/crawls.go is the impure half.
Every limit is code and tested: the guarded fetcher from #258 enforces the host
allowlist/denylist, refuses private addresses in the dialer Control hook (so DNS
rebinding and each redirect hop are covered), caps size and redirects, times out,
and spaces requests per host. A robots.txt Disallow is refused with no override.
On demand, reading is a query source placed last in the chain, after his memory,
his notes, and the local Kiwix ZIMs once those are wired: no URL in the
utterance means no fetch, and only the URL ever leaves the box. Scheduled
watches write notes and announce nothing.
The vendored tree has no x/net/html, goquery or temoto/robotstxt, so the parsers
are stdlib. No new dependency.
internal/rss parses RSS 2.0 and Atom, and polls each configured feed on its own
interval; internal/webfetch is the one door either of them uses to touch the
network. The poller writes items as notes with source "rss:<feed>" and nothing
else: the answer path reads them back when he asks "что нового в лентах?", and
nothing is announced on arrival. A feed that dispatched would be a nag, which is
why the plan's breaking-news rule was left out rather than built.
webfetch is where the limits live, as code rather than a paragraph: http(s)
only, an allowlist (the configured feeds' hosts) and a denylist, a 2 MiB body
cap, a 3-redirect cap, one request per host per second, and a refusal to connect
to any private address — checked in the dialer's Control hook so it holds for
every resolved address and every redirect hop, not just for a literal IP.
Off unless configured: no "feeds" block, no poller, no outbound request. How far
a feed was read is a config fact (rss:latest:<name>), so a restart does not
re-note yesterday's headlines.
kami