#2: approval pauses narrate from ApprovalRequestedEvent (carries
tool/tier/preview/stage directly) instead of OrchestrationPaused +
a pending-approvals map the next event had not yet populated — the
narrator always lost that race and produced generic text.
#3: NarrationTrigger now carries the triggering event's stageId; the
narration status line and RouterNarrationEvent.stageId use it instead
of the router projection's currentStageId, which terminal events have
already cleared ('Stage: none').
#9: ExecutionPlanLocked -> plan.locked and ArtifactValidated ->
artifact.validated mapped to the TUI (Go: feed lines, plan shows the
compiled stage chain); ArtifactValidating explicitly dropped.
#10: blank router turn guard — a length-finish with empty text now
emits an explanatory turn naming the max_tokens budget instead of a
silent blank; blank steering responses no longer emit steering notes.
#12: resumeAbandoned only auto-resumes sessions whose last event is
within orchestration.resume_abandoned_max_age_minutes (default 24h,
0 disables); staler sessions stay parked for POST /resume. Knob is
TUI-editable and persisted.
Artifact content wider than the modal was silently cut off. Lines are now
hard-wrapped at rune boundaries to the modal content width, and scroll
clamping uses the wrapped line count so the last page stays reachable.
Follow-ups spotted while fixing the artifact-content bug:
- #1 robustness: listArtifacts resolves content via runCatching, degrading to null
instead of failing the whole listing on one bad CAS read (resolveContent helper)
- #2 eviction visibility: WARN when a referenced artifact hash resolves to null
(most likely evicted/compacted while still referenced by the event log)
- #3 ordering trap: document on ArtifactCreated/ArtifactContentStored that 'Created'
fires at validation, AFTER ContentStored at inference — the latent fold hazard
- #4 reopen gap: SessionSnapshot now carries workspaceRoot (derived from
SessionWorkspaceBound), so a reopened session restores its workspace label
- #5 orchestrator headroom: isBackEdge externalised to a top-level function so
DefaultSessionOrchestrator drops below the TooManyFunctions threshold (was at it)
#6 (orphaned empty F-010-era artifacts) needs no code change — empty content is
already normalised to null ('(no content stored)'); emission is prevented going
forward by the shipped F-010/F-018/F-020 fixes.
Reopening a session after relaunch sent only a thin summary snapshot, so the output
panel was blank and the event list showed at most 7 entries (of a 100+ event run).
- SessionSnapshot now carries lastOutput/lastResponse, resolved from the last
InferenceCompleted artifact in CAS; tui-go onSnapshot restores the output panel
- recentEvents cap raised 7 -> 200 so a normal session's event list isn't truncated
- resolveLastOutput extracted as a helper
Note: artifact content is unaffected — verified intact and CAS-retrievable for
role_pipeline sessions (artread); content-less artifacts occur only in workflows that
record no ArtifactContentStored (e.g. healthcheck/process-result stages).
A multi-line paste put raw newlines into the single-line input slot, overflowing
the fixed-height box and leaving a smeared/stale region. flattenForDisplay collapses
newlines (↵) and tabs for rendering only; the inputBuffer keeps real characters for
submission.
- generic SystemResourceProbe: owner-agnostic /proc/meminfo system RAM
overlaid on the vendor GPU probe, wired on both managed and static paths
so the VRAM/GPU/RAM gauge renders with an external llama-server (was dormant)
- F-002: classify provider 4xx (e.g. llama.cpp 400) as terminal, not retryable
(except 408/429); stops retrying deterministic request failures to exhaustion
- F-003: FileSystemPromptLoader expands leading ~ / ~/ to user home
- F-004: map InferenceFailedEvent + RetryAttemptedEvent to new
ServerMessage.InferenceFailed / RetryAttempted, decoded+rendered in tui-go;
ArtifactContentStoredEvent explicitly mapped to null (internal, no warn)
- tests: tilde expansion, SystemResourceProbe (static/managed/fail-soft)
Two operator features over the existing WebSocket protocol, plus a tui-go nav fix.
Config editor (g / palette "config"):
- core:config gains a thin registry stack: OrchestrationKnobs ([orchestration]
block), CorrexConfigWriter (round-trip TOML serializer; parseToml(write(c))==c),
ConfigHolder (AtomicReference live config), and EditableConfig (allowlist of
editable fields + patch applier; security fields are absent so they can never
be patched).
- ConfigService validates -> persists (atomic temp+move) -> swaps the holder ->
rebuilds config-derived services. Live-apply is scoped to safe seams: stage
timeout, compaction threshold (now a supplier), router knobs (routerFacade
rebuild), and personalization/project toggles all take effect on the next
session/turn; in-flight sessions keep the config they started with.
server.host/port are persisted + badged "restart required", not hot-swapped.
- Protocol: GetConfig / UpdateConfig / ConfigSnapshot; TUI overlay with
type-aware editing (bool toggle, enum cycle, inline int/string edit) and save.
Artifact viewer (v / palette "artifacts"):
- Server assembles a session's artifacts from the event log and resolves bytes
from the CAS store (StreamQueries.listArtifacts) — a replay-neutral snapshot
read. TUI overlay lists artifacts and shows scrollable content.
tui-go fix: workflow failure no longer clears selectedID (which yanked the user
to the list); listNav lands on the first session when nothing is selected
instead of wrapping to a random one.
Config is not event-sourced (it lives in TOML); editing stays outside the log.
Add TypeRouterNarration constant, mark it event-bearing, decode golden test,
applyServer case appending RouterEntry{Role:"narration_llm"} with metrics, and
routerRows render branch showing bright ◆ prefix with FgStrong content + metrics suffix.
Stage started/completed/failed events are now injected into the router
transcript (role "stage") and rendered in Faint colour, giving the
operator a chronological in-feed view of workflow progress alongside
user/router/tool turns.
Wires the workspace handshake end to end so a session's workspace is bound
from the client's cwd at connect time and is event-sourced for replay.
- Go TUI sends Hello{workingDir=os.Getwd()} as the first WS frame on connect
(protocol.go encoder + client.go connect path; golden test pins the wire
format against the Kotlin discriminator).
- Server adds ClientMessage.Hello, stashes the per-connection workingDir, and
on session start resolves it through WorkspaceResolver's trust pipeline,
emits SessionWorkspaceBoundEvent (invariant #9), and threads the resolved
workspace into OrchestrationConfig for the live run. A Hello after the first
StartSession is ignored (warn); a rejected path binds the resolver fallback.
- Replay derives the workspace from the recorded event: SessionState gains
boundWorkspace, DefaultSessionReducer fills it from SessionWorkspaceBoundEvent,
and ReplayOrchestrator uses it (Path.of only, no filesystem re-query —
invariant #8) with graceful fallback to config for pre-Phase-B logs.
Absent Hello / null resolver degrades to the prior config-workspace behavior.
SessionWorkspaceBoundEvent already recorded the bound workspace root but
it was never surfaced. Map it to a new session.workspace_bound frame
(sealed ServerMessage variant, auto-registered; re-emitted on reconnect
via the snapshot replay), carry it on Session.WorkspaceRoot, and show it
home-abbreviated in the status bar (⌂ ~/Programs/correx). Golden test
pins the decode.
The steer note replaced the action row while editing and vanished once
you esc'd out — so you couldn't see the note or the approve/reject keys,
and it was unclear the note still applied (it did: decide() reads the
buffer). Now the note is a persistent line above the action row (editable
with a caret while typing, a dim reminder once set), and the action row
stays visible. Editing hints clarify enter=approve+send, esc=keep note.
- Events were hard-capped to the last 7 per session in addEvent, so the
e-inspector and EVENTS panel could never show more. Raise to 1000
(effectively all, bounded); the EVENTS panel now shows the latest that
fit (tail), and the inspector scrolls a window around the selection
with a position indicator.
- The TUI had no approval.resolved handling at all — the decision frame
was ignored and pending only cleared on session.resumed. Add the
constant + case: clear the gate and record an ApprovalResolved event
(APPROVED/REJECTED/AUTO_APPROVED + reason) into the stream.
- Status bar now shows the current stage and session status alongside the
name. Relabel the cryptic "N bg" badge to "N elsewhere".
Three QA-found issues in the approval gate:
- displayState gated the in-session/approval surfaces on hasApproval
before sessionEntered, so moving the list cursor onto a session with a
pending gate auto-opened it, and `l` back-to-list couldn't escape
(the gate re-popped). Require sessionEntered first.
- The band ran every preview through the two-column diff renderer, so a
shell tool's argv JSON rendered as an identical-column "diff". Detect
real unified diffs (isUnifiedDiff); render other previews as plain
text, and drop the ^x fullscreen hint when there's nothing to expand.
- The footer duplicated the band's approve/reject/steer/diff keys. It now
shows navigation (l back / e events / q quit) instead.
The plane-2 tool-call assessor records verified preconditions
("[PATH_OUTSIDE_WORKSPACE] …") and the server already ships them in
RiskSummaryDto.rationale, but the Go TUI's RiskSummaryDto had no
Rationale field — so the justification was silently dropped at decode
and the gate showed only an opaque tier.
Decode the rationale, carry it on Approval, and render it under the
header in the approval band (warn-marked, above the diff). This closes
the last deferred item of the plane-2 slice-1 plan: the assessment
surfaced to the approval UX. Golden test pins the rationale decode.
Replace the floating approval modal (which blanked the whole UI) with an
opencode-style band that takes the input bar's slot while a gate is
pending: tool/tier/risk header above a side-by-side old|new diff, with
the session output and event stream still visible above it. The band
height adapts to the diff length.
Add a unified-diff parser that aligns removals/additions into split rows
(blank left cell for a create, blank right for a delete) and a
two-column renderer shared by the band preview and the ^x fullscreen
view. Wire plain a/r to approve/reject to match the advertised keys.
The diff overlay incremented diffScrollOffset on every down-key with no
upper bound; the render clamped only the displayed offset, so the stored
value grew unbounded and the up-key appeared dead for N presses. Clamp
the increment against a new diffMaxScroll() (len(lines) - body height),
shared with the render path via diffBodyHeight().
Rebuild the Go TUI transcript from the event stream instead of
optimistic local echoes. ChatTurnEvent now maps to ServerMessage.ChatTurn
(chat.turn); the TUI auto-vivifies sessions and renders user+router turns
from events. SessionStarted is de-special-cased into SessionAnnounced
(still carries workflowId), dropping the router.response shadow and
optimistic echoes.
Delete the unused Kotlin TUI (apps/tui) and add a kotlinx<->Go
golden-fixture test to lock the wire protocol. Gitignore server runtime
logs.
- gate session-list nav on idle so in-session arrows/jk don't move the list (5a)
- approval dismiss on esc + in-session 'a' reopens a pending approval (5b)
- auto-focus a newly started workflow session (was running invisibly)
- approval actions on Ctrl chords (^a/^r/^x) matching the modal; bare/Alt letters no longer approve; diff closes on ^x/esc
- steer hint in the approval modal; session UUID in the input bar
- env-gated debug logging (CORREX_TUI_LOG) with k.Alt in the key trace
Go TUI decodes model.changed / model.list / resource.status and renders a
status-bar VRAM/GPU%/RAM gauge plus a models overlay (m key / palette 'models'):
lists configured models with the resident one marked, enter swaps (SwapModel),
c clears the pin (ClearModelPin). All three new server messages are
non-event-bearing control/gauge frames, applied immediately like
provider.status_changed.
Server addition required for the picker: ServerMessage.ModelList (model.list,
NonEventMessage) sent once in the initial snapshot from
ManagedInferenceRouter.availableModelIds()/currentModelId() — the TUI otherwise
cannot enumerate swap targets.
Completes the 5-slice model-lifecycle feature. ./gradlew check green; go build/vet clean.
Plan: docs/plans/2026-05-31-model-lifecycle-management.md (slice 5 of 5).
Final plane-2 step: the tool-call intent assessment was decided
server-side but never reached the client — DomainEventMapper dropped
ToolCallAssessedEvent through the else/null branch.
- ServerMessage.ToolAssessed (tool.assessed): disposition as a plain
String + AssessedIssueDto list; observations stay off the wire
(internal replay facts, invariant #9).
- DomainEventMapper maps the event 1:1 (no filtering — rendering
decisions belong in the client).
- Go TUI consumes tool.assessed, records an event entry only for
non-PROCEED or issue-bearing assessments (noise control), and is
added to IsEventBearing() so it buffers correctly during snapshot
replay like its sibling tool.* events.
kami